Activity
From 01/13/2012 to 02/11/2012
02/11/2012
-
11:47 am Bug #95: Z-Wave stopped working due to Ubuntu updates
- I just updated to the new SVN versions...
02/10/2012
-
11:31 pm Feature #96: XMLRPC device.getdevice
- In bijlage zit een aanpassing van de iphone website.
ijzerschelf.php is de hoofdpagina.
Het is niet meer dan ee...
02/09/2012
-
03:07 pm Bug #95: Z-Wave stopped working due to Ubuntu updates
- I'm in the UK at the moment, so not really next to my zwave hardware.
The poll issue was also reported by another use... -
- Im using the updated version for a few days now and still have the following issues
- Switch command is not on but ...
02/08/2012
02/07/2012
-
-
-
-
- Bedankt,
Zodra ik iets toonbaar heb, laat ik het je weten.
02/06/2012
-
- I think you did more than one release :) ...
-
-
-
-
-
-
- One request, can you try DomotiGa r817 together with the new open-zwave wrapper and check if you EZMotion 3-in-1 sens...
-
- I have commited r817, which can be used with latest open-zwave code.
It will also correctly report back (I hope) dev... -
- I have added device.getstate to r817.
Your webclient enhancements are welcome! -
- Added support for ZWave Luminance, Temp and Power sensors.
Added support for logging battery status of ZWave devices.... -
- Simply use my instructions and get revision 409.
I cannot include binaries for open-zwave, since I then have to comp... -
Sow when i use any version below 410 all should be fine
Then my second question wil be:
Please add the open-...-
- See msg in forums/support too.
What I feared seems true, they changed the inner workings/API as it seems in open-z... -
I will try to get the new version of open-zwave is it possible to copy the open-zwave package to the Domotiga Rep...-
- This is clear, you are using an old libdomozwave.so (and thus you get the DomotiGa error because new routine is missi...
02/05/2012
-
- After the above update i switched back to the old Domotiga VM to see if i can get it fixed but for now the problem is...
-
- Onlangs is de iphone webclient toegevoegd. Graag had ik hierop verder gebouwd door mijn eigen webclient te maken.
... -
- Both of my Virtual Machines are Ubuntu Desktop 11.10 at the moment im only focussing on the "new" machine where i`m ...
-
- On Ubuntu 10.04? You don't mean 11.04??
I'm on that version and everything works ok.
Again, the stating that it doe... -
Ubuntu Desktop 11.10 32bit (because 10.04 is not working in vmware the other vm machine worked before using 11.10)
...-
- raymonvdm wrote:
> I already recompiled the domozwave wrapper and that was not succesfull. So i started to build a n... -
- I already recompiled the domozwave wrapper and that was not succesfull. So i started to build a new server ( VMware) ...
-
11:58 am Bug #95: Z-Wave stopped working due to Ubuntu updates
- You'll probably have to recompile your domozwave wrapper, your current version doesn't support the newly added functi...
-
When i try to set a device parameter using the Z-Wave browser which looks updated i get the following error
" [6...-
- Today after ubuntu updates an reboot the controling of z-wave stoped working. I already updated to the latets versio...
02/02/2012
-
-
-
- Changed Mplayer labels to VLC in CameraEditor.
Fixed authentication url for VLC and wget.
02/01/2012
-
10:53 am Feature #94 (New): Send commands over serial
- It would be nice to have the possibiliti to send commands (strings) over serial for e.g. controll an Arduino
-
01/29/2012
-
- You need to recompile the DomoZWave wrapper too.
01/25/2012
-
- Somehow my database didn't get upgraded properly and by starting DomotiGa via Gambas ide produces an error about the ...
-
- You can also set parameter values now, download and compile r811.
I also tried to get RequestAllConfigParams or GetCo... -
-
- I have added inclusion/exclusion support to r810, can you please test? It's called add/remove device in commander.
N... -
- adding and removing devices, update neighborhood and
network status. -
-
- Please recompile your gambas2 environment with the latest svn source code, an important dns client bug has been fixed...
-
- Benoît Minisini just released Gambas 3.0.0
"Release Notes":http://gambasdoc.org/help/doc/release/3.0.0?view&en
Whil... -
01:28 pm Bug #93: globalvar save every hours
- rdnzl wrote:
> Looks like you the table is missing from your database.
> Can you add it again..
>
> Save this in...
01/24/2012
-
- Looks like you the table is missing from your database.
Can you add it again..
Save this in globalvars.sql:...
01/22/2012
-
- this error in the log file every hours
2012/01/22 13:00:01 ERROR: Unknown table: globalvars at Main.SaveGlobalVars.4...
01/21/2012
-
- I looked in it some more, configuration parameters can be set in:
// <Manager::SetConfigParam>
// Set the value of ... -
- These are the one I couldn't find anymore in Manager.cpp, they are also in Driver.cpp
@//----------------------------... -
- As far as I can tell there's still a function to add nodes to the network, however resposibility seems to have moved ...
-
- Are you sure Manager::Get()->BeginAddNode and Manager::Get()->EndAddNode or something similar are still in the open-z...
-
- Are you sure Manager::Get()->BeginAddNode and Manager::Get()->EndAddNode or something similar are still in the open-z...
01/20/2012
-
- After just adding a few new modules to domotiga I miss being able to include them from domotiga itself as well as set...
01/19/2012
-
- I would like to now if it is possible to get support for dimming Duwi Z-Wave devices using iphone portal / domotiga p...
01/17/2012
-
- Added Show Disable option in Events view, thanks for the patches Francois!
-
01/16/2012
-
-
- This busy loop function has to be rewritten to more event based.
Don't send a ZWave ACK response as answer on a ACK p... -
Also available in: Atom