Activity
From 02/04/2012 to 03/04/2012
03/04/2012
-
02:23 pm Bug #108: Type mismatch on lastseen field
- Sorry, thought my client was up to date. All fine now.
-
11:49 am Bug #108: Type mismatch on lastseen field
- This issue was fixed a week ago in r843.
Please update and test. -
-
- When I try to open the settings of a device that has Null in the lastseen field, I get the following error and the cl...
03/01/2012
-
10:18 pm Bug #95: Z-Wave stopped working due to Ubuntu updates
- To use with latest open-zwave:
open-zwave Revision: 489
domotiga Revision: 848
Change line 773 of DomoZWave to:
...
02/28/2012
-
04:41 pm Feature #107: Add KAKU protocol support for RFXtrx433
- Ah my bad.. I misunderstood.
It is working now using ARC as Type, ARC Module as Device,
Interface RFXCom Tranceiv... -
- You should use ARC or AC as module type depending on type of KAKU module (with or without codewheel)
First try to sw... -
- I would really like it to be able to transmit commands to KAKU modules through the KAKU protocol.
When I send a t...
02/27/2012
-
-
- Also watch out that in later versions of open-zwave you must specify polltime in mS instead of Seconds (which we do n...
-
08:29 am Bug #95: Z-Wave stopped working due to Ubuntu updates
I think the polling value is set to low now...
02/26/2012
-
-
-
-
- Ah! Yes that would do it. Sorry, It seems I didn't spot that in the website instructions.
-
- Nice!
When my CV is broken I also want to buy a new opentherm one and build the gateway.
I think for now it's bet... -
- I have added you code to r844.
Thanks!
I also updated the wiki with how to install picotts. -
- How did you install the database, from the command line?
Since a few revisions the command to install it has changed... -
- Added compile script to compile binaries.
-
- It is possible I was doing something wrong, but to setup the database for the first time I had to add
use domotig... -
02:22 pm Feature #105 (Closed): OpenTherm gateway support
- I build the OpenTherm gateway as described at http://www.tclcode.com/opentherm/index.html
I currently in the proce... -
-
02:08 pm Feature #104 (Closed): Add support of pico tts engine
- Pico tts engine is the text to speech engine used in Android.
I think it speak a better french than espeak.
fil... -
-
I just updated to the new SVN version rebuilded domozwave/open-zwave and polling the devices seem to work (Revision...-
-
-
-
- I just update to the new version of Domotiga (Thanks for the release)...
02/25/2012
-
- New version 0.1.204, you must upgrade your database.
Please make a backup of your database and DomotiGa directory fi... -
- Please make a backup of your database and DomotiGa directory first.
Added LogPrefix setting this will be prefixed to ... -
-
- New version 0.1.203, you must upgrade your database.
Please make a backup of your database and complete DomotiGa dir... -
- I left it out because of the new Database Wizard in the Client GUI, and the option to use another database name, I wi...
-
- Thanks, I have added the fix to the next version, out this weekend.
02/24/2012
-
- When 1st install, it's needed to add the line : USE domotiga; in the domotiga.sql
Maybe a comments in install... -
- The polling routine keeps running after a restart of the module.
In the main.module the following code
@
PUBLI... -
- Added AddAssociation button to commander.
Enable Remove node mode by default.
Rearranged commander buttons.
Added sup... -
- I added your fix to r835.
Thanks! -
-
- Im now running the following versions
open-zwave Revision: 453 (after trying 429 and 437)
domotiga Revision: 834
Bu...
02/23/2012
-
- When creating a new scenario a null object error message appear.
Looking in the code it's appear even wwhen a new ...
02/22/2012
-
- Since SVN revision 834 it is possible to see the W and KwH reading of the AN158 after recompiling the Z-Wave wrapper
...
02/20/2012
02/17/2012
-
- Hi Ron,
Can you tell me how to show the power usage from an AN158 it measures W and KWH but domotiga does not show...
02/16/2012
-
12:47 pm Bug #98: Fmain.DisplayGraph
- With the previous release the client open the graph localy (not really a big problem for me there a web server runnin...
-
- This correct behavior.
You run a server on your pogoplug, and therefor the GUI you start must be client mode and thu... -
- The Graph is correctly generated but there is one bug and a new one
i use the server version on a pogoplug pink (arm... -
02/15/2012
-
- I added support for this to r832, also for motion/no motion and open/closed.
But please keep in mind that RRDtool is... -
- I fixed related problems in r832, please test.
For the client to be able to show the graphs, you need to install/con... -
- Fixed bug only displaying first graph of a category.
Fixed bug not showing extended graphs.
Convert RRD value when va...
02/14/2012
-
I just updated to the new versions...-
- I Need to graph Device with On/Off value but the rrd data contain U for non int value so i modified rrdtool.module in...
-
-
- Create the right graph but get list of only 1 in simplegraphing and wrong url for the graph created manualy
The log...
02/13/2012
-
11:16 pm Feature #96: XMLRPC device.getdevice
- Yes it is still OK.
I use the submodal.css stylesheet. It seems to be needed for the iphone layout. It would be ni... -
- Globalvar Thermostat_Mode didn't survive a reboot
-
- I have slightly changed and uploaded your code (r830)
Move floorplan images to images/floorplans directory and renam... -
-
- Thanks to Gino.
02/12/2012
-
- This upload (mobileExample.zip) shows a sample control. This sample is based on the previous upload.
-
-
- Please make a backup of your database and complete DomotiGa directory first.
Added support for Ncid callerid, thanks ... -
02/11/2012
-
- I just updated to the new SVN versions...
02/10/2012
-
- In bijlage zit een aanpassing van de iphone website.
ijzerschelf.php is de hoofdpagina.
Het is niet meer dan ee...
02/09/2012
-
- I'm in the UK at the moment, so not really next to my zwave hardware.
The poll issue was also reported by another use... -
- Im using the updated version for a few days now and still have the following issues
- Switch command is not on but ...
02/08/2012
02/07/2012
-
-
-
-
- Bedankt,
Zodra ik iets toonbaar heb, laat ik het je weten.
02/06/2012
-
- I think you did more than one release :) ...
-
-
-
-
-
-
- One request, can you try DomotiGa r817 together with the new open-zwave wrapper and check if you EZMotion 3-in-1 sens...
-
- I have commited r817, which can be used with latest open-zwave code.
It will also correctly report back (I hope) dev... -
- I have added device.getstate to r817.
Your webclient enhancements are welcome! -
- Added support for ZWave Luminance, Temp and Power sensors.
Added support for logging battery status of ZWave devices.... -
- Simply use my instructions and get revision 409.
I cannot include binaries for open-zwave, since I then have to comp... -
Sow when i use any version below 410 all should be fine
Then my second question wil be:
Please add the open-...-
- See msg in forums/support too.
What I feared seems true, they changed the inner workings/API as it seems in open-z... -
I will try to get the new version of open-zwave is it possible to copy the open-zwave package to the Domotiga Rep...-
- This is clear, you are using an old libdomozwave.so (and thus you get the DomotiGa error because new routine is missi...
02/05/2012
-
- After the above update i switched back to the old Domotiga VM to see if i can get it fixed but for now the problem is...
-
- Onlangs is de iphone webclient toegevoegd. Graag had ik hierop verder gebouwd door mijn eigen webclient te maken.
... -
- Both of my Virtual Machines are Ubuntu Desktop 11.10 at the moment im only focussing on the "new" machine where i`m ...
-
- On Ubuntu 10.04? You don't mean 11.04??
I'm on that version and everything works ok.
Again, the stating that it doe... -
Ubuntu Desktop 11.10 32bit (because 10.04 is not working in vmware the other vm machine worked before using 11.10)
...-
- raymonvdm wrote:
> I already recompiled the domozwave wrapper and that was not succesfull. So i started to build a n... -
- I already recompiled the domozwave wrapper and that was not succesfull. So i started to build a new server ( VMware) ...
-
- You'll probably have to recompile your domozwave wrapper, your current version doesn't support the newly added functi...
-
When i try to set a device parameter using the Z-Wave browser which looks updated i get the following error
" [6...-
- Today after ubuntu updates an reboot the controling of z-wave stoped working. I already updated to the latets versio...
Also available in: Atom