Activity
From 04/20/2012 to 05/19/2012
05/19/2012
-
04:25 pm Revision 886: Check if HomeId is known before calling OZW calls, to prevent crash.
- Added several node info routines for future use, thanks Alex.
-
03:08 pm Bug #134: Z-Wave interface: Poll Interval=0 doesn't disable polling, but the OZW does extreme agg...
- Hi Ron,
Thanks, this is an improvement. Only i think the polling with Domotiga for Z-Wave needs to be revised a li... -
- Ok all code is welcome ;-)
-
-
- Hi Ron,
I have tested it and it works fine.
Regards,
Alex
ps. i will submit a new version of the wrapper, w... -
- Hi Ron,
I tested it and it works fine.
Regards,
Alex -
- I cannot reproduce it, all my logging works ok.
Can you open your DomotiGa project with IDE, and set a breakpoint ... -
-
- Fixed this in r884 and r885.
-
-
-
- Changed it in r883.
-
-
-
- Fixed in r883.
-
- Enable detailed logging again.
If polltime is set to 0 then disabled polling. (needs more work)
Made timestamp log ou... -
- Hi Ron,
I retrieved revision 882 and it works perfectly now. Thanks!
Gr.
Alex -
- Fixed in r882, thanks.
-
05/18/2012
-
- Hi Ron,
I noticed an cosmetical issue when adding new Events, the "Action" names aren't visible until it has been ... -
- Thanks :-) Will make my upgrades easier (and debugging the Open Z-Wave :P )
-
- Hi Ron,
Yes, got the same feeling about the Open Z-Wave project :D
If no poll time isn't specified, it goes to... -
-
-
-
- Will fix this too, I played with some of the newer API calls, but it wasn't better than we had before.
-
- Ok I will fix it, I also want to have things as generic as possible, but thats not always easy, thanks.
-
- Yeah I know.
Coding the OZW wrapper is a pain in the ass...
Every time something work ok, the guys from OZW change ... -
- Hi Ron,
Can you change a few things in the DomoZWave.cpp?
When i was using 0.1.204 i got much Z-Wave logging in... -
- Hi Ron,
I was testing with the Open Z-Wave and poll interval=0, but if you disable the logging on the Z-Wave inter... -
- Hi Ron,
If go into the Setup -> Interfaces -> Z-Wave and i empty the Open Z-Wave "Poll Interval", Domotiga crashes... -
- Hi Ron,
I tested it and it working perfect now, thanks!
Gr.
Alex -
- Hi Ron,
To get the same format as the OZW_log.txt, just add the following include to the wrapper:
#include <sys/time... -
- I have added this code to version 0.1.206, thanks!
@raymonvdm don't under estimate the needed electronics knowledg... -
- I cannot get it to work 100% reliable, it's like kicking away your own legs...
-
-
- I have added this code to version 0.1.206, thanks!
-
- I have added this code to version 0.1.206, thanks!
-
- I have added your fixes to version 0.1.206, thanks!
-
-
- Thanks, I added your code to version 0.1.206, would be even better if it had the same date format as the OZW_Log form...
-
03:21 pm Feature #105: OpenTherm gateway support
I also would like to know how to build the gateway. I found a list of part but i`m afraid that it wil not be a succ...-
- New version 0.1.206, you must upgrade your database.
Please make a backup of your database and DomotiGa directory tr... -
-
- Please make a backup of your database and DomotiGa directory tree first!
Added support for controlling and monitoring... -
-
- Hi Ron,
I am debugging de HSM100 sensor and i noticed that the Open-ZWave wrapper debugging logging isn't easy rea... -
Hi Ron,
In the past we have had contact about Plugwise and you told me that is might be possible that plugwise i...-
- I have updated and now i`m running
Domotiga Revision: 878
OpenZwave Revision: 527
Node4 = Meter (NorthQ NQ9021 Pu... -
- Question, can you make some screenshots of the devices you have and their values, and maybe your interface, so I can ...
-
- Thanks for the fix, will update soon.
-
- Thanks, nicely written code!
Will include it soon. -
- I took another shot at it with the following file...
05/17/2012
-
10:55 pm Feature #105: OpenTherm gateway support
- Today I finally finished the code and tested it roughly
The OpenTherm interface now supports 5 devices:
+Thermo... -
- im trying to get it going but without any succes for now
I found out that i need to create a file /etc/udev/rules...
05/16/2012
-
- I just tested the new versions and the switching using the Duwi Dimmer is working now. When switching on the status i...
-
08:41 pm Bug #128: Out of memory - Bleutooth.ScanBleutooth.88
- Got the same and even Ubuntu 10.10 was frozen that I had to reset it.
Could not make a list of running programs. Dis... -
- Can you test again with latest CZwave.class and latest open-zwave r527, they fixed a bug in OZW for dimmers.
I can s... -
- Ahummm :-) Forgot to update "sCond", which is also numeric
CASE ">"
IF CFloat(Replace(CString(sValue), ",", ".",... -
- Description:
I created a IF condition for the variable "Minute" and used the greater operand. This results in the fo...
05/15/2012
-
- I have updated in the past but reverted because of issues with the new openzwave software
I currently run
Domot... -
- As far as I can see you are not running the last version of CZWave.class (r853), did you reinstall an older version, ...
05/14/2012
-
- I can go to Z-Wave Commander but when i select node 4 or 5 the "Develop -> Meter" option is grayed out. When i select...
-
04:33 pm Bug #128: Out of memory - Bleutooth.ScanBleutooth.88
- I too saw this issue, but with another module failing (beleive it was Z-Wave). It looks like some memory handling is...
-
03:35 pm Bug #127: Device status log seems to have gone away
- Here are a few debug snippets with device debug enabled on two existing devices that have values logged to DB, and a ...
-
- I think you must remove it here and insert it after the -$(LINK) word, since it's a linker option not a compiler one....
-
- Can you open zwave commander from tools menu, select node 5 from list and go to tab "Develop" and press "Meter" butto...
05/13/2012
-
- Hi Ron,:)
I don`t know what i am looking for when searching for examples for this board. The things i did find are ...
05/12/2012
-
- ...
-
- Since the issues with the NorthQ power logger i`m trying an additional device the Aeon Labs Home Energy Monitor
h...
05/11/2012
-
- I have tried it here and it seems to work ok??
Can you enable devices debug in main settings and log a few changes?
05/10/2012
-
- The only devices I had logged were a few switchable devices, so On/Off strings only. I tried adding a few more, a Goo...
05/08/2012
-
09:25 pm Support #126: HomeMatic rewrite
- pls remove the code in HM_Error that disables module if no connectivity can be achieved. It does not work well. There...
-
- I will add this code soon, had a few days off, will be picked up soon, thanks.
-
- There was a change in that code recently, maybe this caused the problem.
Can you give some values you have logged no... -
- I have seen this in the past, unclear what causes this.
I have a rewrite of that code somewhere, will try to find it...
05/07/2012
-
- Since some time i`m having an issue with DomotiGa.gambas crashing with the error "[1] Out of memory. Bluetooth.ScanBl...
05/05/2012
-
- It seems like device status is no longer logged to the DB even if this is selected. This happens on both my systems a...
-
- No, the opposite.
I have multiple buttons like 2 in the livingroom on the wall for one device and also a portable mo... -
- Rewrite, better stack handling, 4 levels of debug info, signal strength in debug, using autocreate (with minor mod to...
05/02/2012
-
- ...
04/30/2012
-
- rdnzl wrote:
> I corrected it, is all ok now?
It works, I've made some more changes that I'll put up tonight when... -
- Changes:
New stack management to avoid WAIT's.
Temperatures can be controlled through Actions.
Detection and reco...
04/28/2012
-
- Plugwise: Logged 2 days of calibration data, no change so far. Will start moving plugs around.
HomeMatic: rewrote ... -
-
-
- I corrected it, is all ok now?
-
-
-
-
-
-
-
04:56 pm Bug #123: OZW polling
- Work for my horstmann asr-zw i didn't have other zwave device for now for testing if it break the command_class_basic .
-
- Work Great for me
Thanks
-
- Resolved for me.
-
- Niels, where do you exactly need the multiple AC addresses per device for?
To switch multiple lights with one wall b... -
-
-
-
- [[http://forum.velleman.eu/viewtopic.php?f=3&t=3074]]
We must let DomotiGa talk to the comedilib instead of libk8055 ... -
- i need stopping, i can start it by an other way but the two are appreciable.
04/27/2012
-
- I changed it in r876, but i'm not sure if it broke the command_class_basic reporting for other type of z-wave devices...
-
-
- Delete previous graph image before downloading next one.
-
- I have fixed the bug regarding updating graphs from client to server.
Do you want to restart domotiga server with xm... -
- I changed a few things, check attached screenshot.
-
-
- Display more details of various event actions in overview.
Globalvar value can be one character long now in Globalvar... -
- There is a bug in the action list panel when using script as action.
depending what contain the script all action af... -
-
04/26/2012
-
-
- it report the right value at start thermostat heat and switch on but for basic it's Dim 1
-
- Can you catch some cli output from DomotiGa or DomotiGaServer depending on what you use, while switching and polling?...
-
- my device work as switch return dim 1 instead of On when polling.
Work correctly before the update
OZW 525 and late... -
- Yes my guess too that they were saved in a different order than thought and therefor also run in a different order.
... -
- Seems to work great now, events are loaded in the order they are saved, I'm guessing the reason the events where run ...
04/25/2012
-
- Any instance of @"DSC5401 Interface"@ in the code needs to be changed to @"DSC Interface"@ when searching for the cor...
-
-
-
- I found the problem, the tableview for actions was filled with the action id as key, changed it to use order field in...
-
-
- For me they looked identical up to 3 decimals, after that it became difficult to remember. I'll probably dump them to...
-
- Another project is switching to Gambas3, which is much faster too..
-
- That's why the Plugwise module need to be rewritten (I wrote it when I was a Gambas newbie), imagine the delay if you...
-
- I found that using the break (I understood why it was there) did not make a difference. It just kicks out all the com...
-
- Ok this should be reproducable, I'm going to have a go at it, thanks.
-
- Now I remember correctly, it had to do with using WAIT in an event like _Read(), there you must use SLEEP.
http://gam... -
- Okay, I've done some more testing with the Gambas2 SVN and latest DomotiGa SVN and figured out that if the events are...
-
- I read it's bad to use a wait without a delay, as that freezes the GUI. In this case I wanted the receive events to ...
-
- Ich liebe es, wenn ein Plan funktioniert! :D
The change works! It does not create a new device and listens to the...
04/24/2012
-
-
-
- Added the patches to r865, thanks.
About the SLEEP with WAIT replacement, it's bad to use WAIT in a GUI program sinc... -
- Replaced SLEEP command by WAIT command back in.
Improved Quickset module (show only enabled devices)
Improved HomeMat... -
- Fixed in r864, thanks.
-
-
07:54 pm Feature #109: Add support for freebox revolution adsl box
- No new functionality yet
-
- Patches against todays svn.
Put WAIT command back in. SLEEP gets the program in a infinite loop, under some circumst... -
- Did you manage to extend the functionality in the mean time?
In it's current state it's maybe more elegant to put th... -
- I have an account, but I have to make it more Android version aware first, and add some features, in it's current sta...
-
- Can you once more generate some logging of that node?
I think in the mean time you can call one of these routines ... -
- rdnzl wrote:
> I have added your code to version 0.1.205, please test, thanks!
In CDSC.class on line 517,
This:
@... -
- No it is still not working it tested it yesterday
It only works on first time after starting Domotiga with the old... -
- Does this work with latest code?
-
- This bug might be based on a false premise as I've been running a somewhat outdated version of Gambas2. Will update t...
-
- @Niels, thanks I fixed it, please test.
@ReWind, I will update the wiki, btw Gambas2 2.24.0 is out now. -
-
- I didn't see the reply about the double == until now, you are right, my Gambas2 is a package install on Fedora, gamba...
-
- Yesterday i reverted the snapshot so i`m back at .204
I think the problem is that Domotiga is sending on and off to... -
-
-
- I know it exists. Only works if you have the central unit, that does the translation. I don't know what the limitatio...
04/23/2012
-
- I looked again and also found the following ...
-
-
-
-
- Got a difference found in decoding the recieved code.
Using 2 different hand remotes:
2012/04/23 21:49:46 [RFXC... -
-
- I have disabled HomeMatic by default now, thanks!
Can you give more info about not being able to switch the Duwi d... -
-
- Johan, it seems the HomeMatic has a XML-RPC interface, to set and get everything?!
Or am I mistaken? This seems to be... -
- Today i updated to Domotiga Revision 853 and OpenZwave 525 and i would like to note the following items
- Homemati... -
- I think you mean /usr/local/bin/k8055 ? ...
-
- It's seems that the k8055 library or command utility is not compiled correctly and is missing symbols, maybe because ...
04/22/2012
-
- Today i connected the Velleman K8055 interface to the Domotiga server but it is not working yet. When i enable the in...
-
-
- Will start working on implementing this one now...
-
-
04/21/2012
-
- New version 0.1.205, you must upgrade your database.
Please make a backup of your database and DomotiGa directory tr... -
- You already have the devicetypes and interface, that conflicts...
I also change the cmd and value seperation you had... -
- Fixed it just now, I hope...
Have no access to my plugwise stick, so unable to test here... -
-
- 1205 works partially. Receiving data is fine. The Quickset does not work, dropdowns not working. I have to check my d...
-
- If you make the SUB return a string rather than an INT it works
-
-
-
-
-
- No feedback.
-
-
- Would be nice if we could reproduce it with a small action list and have the events debug enabled to generate some lo...
-
-
-
-
- I have added your code to version 0.1.205, please test, thanks!
I changed syntax of SendCommand to make it more comp... -
- I have added support for these sensors to version 0.1.205, please test, thanks!
-
- I have added your code to version 0.1.205, please test, thanks!
-
- Fixed in version 0.1.205, please test, thanks!
-
- Fixed in version 0.1.205, please test, thanks!
-
- Please make a backup of your database and DomotiGa directory tree first!
Added support for UPM/ESIC WT440/WT450H sens... -
-
- Hmm, I just had another event that got all shuffled, but this one only had one delay-based action, and several other ...
-
- I've had another go at it, and it seems like all delay-based actions get shuffled down to the end of the event - _mos...
-
- crc's are calculated as an integer in CalculateCRC and converted to hex with:
sCRC = Hex(CalculateCRC(sString))
T...
04/20/2012
-
- I guess you reuse the same delay action, does it also sort delay action with different id's, so two new created diffe...
-
-
- Good catch I will fix this, I guess this also happens with the other values.
Thanks.
Also available in: Atom