06/14/2012

09:10 am Revision 920: Removed strange characters in front of Celsius signs on home screen weather.

Resize the home screen area correctly. rdnzl

06/13/2012

05:45 pm Bug #145 (Closed): Homescreen: Main log last line not on screen

In the Home screen the main log is located at the bottom part of the screen.
The last line in the Main Log is not ... OWK

05:37 pm Bug #144: Home screen weather shows strange character

Sorry for setting the field assignee, my mistake.
I'm not able to solve this issue of course:) OWK

05:11 pm Bug #144 (Closed): Home screen weather shows strange character

In the home screen the outside weather is displaying a strange character between the number of degrees and the unit (... OWK

03:42 pm Feature #143: AutoCreateDevice for CurrentCost CC128 / EnviR

Here are the two changes.
= Means existing line unchanged
+ Means new line
~ Means a changed line
1. Devices.module... tickett

06/11/2012

04:48 pm Revision 919: Replaced all left over import_request_variables calls with replacement call to supp...

rdnzl

04:42 pm Bug #142 (Feedback): devices_log entries aren't deleted if device is deleted

Added to revision r917. rdnzl

04:41 pm Feature #139: Nuon E-Manager SmartPlugs support

Did you also move devices around (location), maybe the network routes need to be updated (update neighbors), otherwis... rdnzl

01:17 pm Feature #139: Nuon E-Manager SmartPlugs support

Switching my dimmers with on/off is working but since i added the Nuon E-Manager devices my network seams unstable th... raymonvdm

06/10/2012

11:28 am Feature #143 (Feedback): AutoCreateDevice for CurrentCost CC128 / EnviR

I had to make a tiny change to the CurrentCost class and another to the devices class to enable automatic device crea... tickett

06/09/2012

04:01 pm Revision 918: Fixed parsing of P1 telegrams. Please test.

rdnzl

12:41 pm Revision 917: Fix lost change.

rdnzl

12:33 pm Revision 916: Also delete log data of a deleted device.

rdnzl

06/07/2012

06:19 pm Bug #142 (Closed): devices_log entries aren't deleted if device is deleted

It is possible to log raw value changes to the "devices_log" table, but when the device is deleted, the entries for t... Alexie

08:27 am Bug #141 (Closed): Improvements for Event & Device Editor

rdnzl

08:26 am Revision 915: Check for gambas install in compile.sh

Group protocol buttons correctly in RFXComCmdr RX. rdnzl

06/06/2012

06:58 am Bug #141: Improvements for Event & Device Editor

I tested the fixed and everything works fine now. Issue can be closed. Alexie

06/05/2012

10:12 pm Revision 914: Updated binaries.

rdnzl

10:06 pm Revision 913: Set correct return code for XMLRPC updategraph call.

rdnzl

09:54 pm Revision 912: Updated binaries.

rdnzl

09:54 pm Revision 911: Fixed X10 address format in RFXCommander.

rdnzl

09:33 pm Revision 910: Replaced 'import_request_variables("gp","r_");' which is no longer supported in php...

Thanks JJ. rdnzl

09:31 pm Revision 909: Replaced 'import_request_variables("gp","r_");' which is no longer supported in php...

Thanks JJ. rdnzl

09:23 pm Revision 908: Added missing thermostat_constant table creation, thanks JJ!

rdnzl

09:19 pm Feature #139: Nuon E-Manager SmartPlugs support

As far as I know it was a open-zwave bugfix, and should work with DomotiGa already, it had to do with not being able ... rdnzl

09:16 pm Bug #141 (Feedback): Improvements for Event & Device Editor

Applied these fixes to r907.
Changed behavior of events disable checkbox, it's called 'hide disabled' now.
Thanks! rdnzl

09:15 pm Revision 907: By default display all events, you can hide the disabled ones with the checkbox now.

Only ask to enable device when newly created, same for events.
Added more sanity checks to insert/move event action c... rdnzl

06:05 pm Bug #141 (Closed): Improvements for Event & Device Editor

I was testing some more in the Event and Device Editor and i found some bugs/unhappy things. Things like:
- Event - ... Alexie

04:36 pm Feature #139: Nuon E-Manager SmartPlugs support

I see that and r527 of open-zwave are released but i think that Domotiga also needs support for this. I`m not sure ... raymonvdm

06/04/2012

07:39 pm Revision 906: Better debug logging.

rdnzl

07:38 pm Revision 905: Better settings field enable/disable code.

rdnzl

07:35 pm Bug #140 (Closed): Edit Macro and List Events can't handle empty lists

rdnzl

07:01 pm Feature #138: REQ: Extend SetConfigParam to allow full control of Open Z-Wave library (for e.g. A...

I was working on it this weekend, but no success yet. I got issues interfaces from Gambas to the DomoZWave.cpp (i add... Alexie

06:59 pm Bug #140: Edit Macro and List Events can't handle empty lists

Hi Ron,
I tested r904 and it works fine ... Issue can be closed ;)
Regards,
Alex Alexie

09:44 am Bug #128: Out of memory - Bleutooth.ScanBleutooth.88

Ok so it seems it's related to Bluetooth code, they both call EXEC to run commands, will have a look. rdnzl

09:43 am Bug #140: Edit Macro and List Events can't handle empty lists

Applied both fixes, thanks. rdnzl

09:43 am Revision 904: Updated binaries.

rdnzl

09:42 am Revision 903: Enable save button when poll sleeping and update network checkboxes are changed.

rdnzl

09:40 am Revision 902: Fixed bug fix for empty events list.

rdnzl

06/03/2012

07:02 pm Bug #140: Edit Macro and List Events can't handle empty lists

Now we are talking about small fixes, i noticed a small one in "FSettingsZWave.class". Currently you can't save if yo... Alexie

06:39 pm Bug #140: Edit Macro and List Events can't handle empty lists

Hi Ron,
Issue #1 is fixed, issue #2 is not. You applied the second fix in the wrong sub routine. You did it in "tv... Alexie

02:17 pm Revision 901: Changed address of P1Mbus meters from P1-MBus<type> to P1-MBus<channel>.

rdnzl

02:02 pm New version 0.1.208

New version 0.1.208, you must upgrade your database.
Please make a backup of your database and DomotiGa directory tr... rdnzl

01:59 pm Bug #140 (Feedback): Edit Macro and List Events can't handle empty lists

rdnzl

01:59 pm Bug #140: Edit Macro and List Events can't handle empty lists

Fixed in 0.1.208. rdnzl

01:55 pm Revision 900: New version 0.1.208, you must upgrade your database.

Please make a backup of your database and DomotiGa directory tree first!
Added support for Dutch smart meters based o... rdnzl

12:45 pm Revision 899: Tag for version 0.1.207 of DomotiGa.

rdnzl

06/01/2012

10:06 pm Bug #140 (Closed): Edit Macro and List Events can't handle empty lists

--------
Issue # 1
--------
When in "Edit Macro" menu and "no" Macro's exist and clicking "Delete" or "Edit", Do... Alexie

05:55 pm Feature #139: Nuon E-Manager SmartPlugs support

In the Open Z-Wave Greg mentioned he modified the code already, but he is looking for a volunteer for testing. Maybe ... Alexie

11:27 am Bug #128: Out of memory - Bleutooth.ScanBleutooth.88

I don`t ping anything in Domotiga and i am only using bleutooth for polling but it could be that i`m using Gambas 2... raymonvdm

11:10 am Bug #128: Out of memory - Bleutooth.ScanBleutooth.88

You all run the latest Gambas2 version correct?
So higher than 2.24.x
I ping +5 devices continually for months in a... rdnzl

11:06 am Bug #134 (Closed): Z-Wave interface: Poll Interval=0 doesn't disable polling, but the OZW does ex...

rdnzl

11:01 am Feature #139 (In Progress): Nuon E-Manager SmartPlugs support

I know, I have these devices too, the power bar multichannel is not correctly recognized by the open-zwave library.
... rdnzl

10:49 am Feature #139 (Closed): Nuon E-Manager SmartPlugs support

Hi Ron,
Is it possible to get SmartPlug support for the GreenWave SmartPlugs in Domotiga ? The single socket unit ... raymonvdm

10:33 am Bug #128: Out of memory - Bleutooth.ScanBleutooth.88

I have had this issue again last weekend but could not make an ps auxf > ps.txt because i had to restart it using my ... raymonvdm

03:46 am Bug #128: Out of memory - Bleutooth.ScanBleutooth.88

When running using DomotigaServer.gambas instead of the full GUI.... tradiuz

05/30/2012

08:58 pm Bug #134: Z-Wave interface: Poll Interval=0 doesn't disable polling, but the OZW does extreme agg...

Hi Ron,
This issue can be closed, it works fine now ;)
Regards,
Alex Alexie

08:54 pm Feature #138: REQ: Extend SetConfigParam to allow full control of Open Z-Wave library (for e.g. A...

Thanks :P I am getting a little bit distracted by work, so my feedback on this specific requested (and the Minimote) ... Alexie

08:37 pm Revision 898: Updated binaries.

rdnzl

08:37 pm Revision 897: Fixed wrong color of min values in extended graphs, thanks Joost!

rdnzl

08:12 pm Feature #138: REQ: Extend SetConfigParam to allow full control of Open Z-Wave library (for e.g. A...

You are right I forgot to commit that file, did it this morning. rdnzl

08:11 pm Bug #137 (Closed): BUG: "Logs -> Devices" gives incorrect values if "Correction" is used

rdnzl

08:05 am Revision 896: Added optional size param to setconfigparam routine.

rdnzl

06:57 am Feature #138: REQ: Extend SetConfigParam to allow full control of Open Z-Wave library (for e.g. A...

I just saw you modified the DomoZWave.cpp/.h already, but you also need to modify CZWave.class (the optional paramete... Alexie

05/29/2012

10:06 pm Feature #136: Write command to shell scrpit.

Thank you for fast support :-)
I will try it soon (not home right now) pixi

09:58 pm Revision 895: Added support for size value to setconfigparam code in OZW wrapper.

rdnzl

09:57 pm Revision 894: Catch errors in RFXComTRX protocol setup code.

rdnzl

09:57 pm Bug #137: BUG: "Logs -> Devices" gives incorrect values if "Correction" is used

Just tested 0.1.207 and it works perfectly now :D
Alexie

09:51 pm Feature #138: REQ: Extend SetConfigParam to allow full control of Open Z-Wave library (for e.g. A...

Hi Ron,
Not yet, because i am still testing the DomoZwave / Open Z-Wave code with DomotiGa. Even if this isn't cha... Alexie

09:49 pm New version 0.1.207

New version 0.1.207, you must upgrade your database.
Please make a backup of your database and DomotiGa directory tr... rdnzl

09:47 pm Feature #138 (In Progress): REQ: Extend SetConfigParam to allow full control of Open Z-Wave libra...

You also added the field to the Z-Wave commander I guess? rdnzl

09:35 pm Support #132 (Closed): Improved Open-ZWave wrapper logging

rdnzl

09:34 pm Feature #136 (Feedback): Write command to shell scrpit.

I have added this functionality to version 0.1.207, but there is maybe one thing to change, if you switch a device th... rdnzl

09:32 pm Bug #137 (Feedback): BUG: "Logs -> Devices" gives incorrect values if "Correction" is used

Please test version 0.1.207. rdnzl

09:23 pm Revision 893: New version 0.1.207, you must upgrade your database.

Please make a backup of your database and DomotiGa directory tree first!
Shell interface, you can now also call scrip... rdnzl

09:07 pm Revision 892: Tag for version 0.1.206 of DomotiGa.

rdnzl

05/28/2012

09:44 pm Feature #138 (Closed): REQ: Extend SetConfigParam to allow full control of Open Z-Wave library (f...

The Domotiga SetConfigParam correctly only supports "iNode", "iParam" and "iValue". The Open Z-Wave library also supp... Alexie

09:26 pm Bug #137 (Closed): BUG: "Logs -> Devices" gives incorrect values if "Correction" is used

If you use the "Correction" for raw values, the list shown in "Logs -> Devices" gives for ALL entries the LAST value ... Alexie

05/23/2012

08:17 pm Feature #129: Aeon Labs Multi

Just put an & in between or at end of line
@Main.hZWave.RequestNodeDynamic(8) &
Main.hZWave.RequestNodeDynamic(9)... rdnzl

08:06 pm Feature #136: Write command to shell scrpit.

Yes I will write this, good idea, hold on... rdnzl

05/22/2012

11:39 pm Feature #136 (Closed): Write command to shell scrpit.

Hello everyone.
First of all i have to say ! Wonderful software.
But i have one qusetuion?
Is it possible t... pixi

05:30 pm Feature #129: Aeon Labs Multi

It seems to be doing something but only when i use one command per action
So i created to actions within the same ... raymonvdm

04:55 pm Feature #129: Aeon Labs Multi

I already posted (in another topic/place) that the MeterReport call that I suggested earlier wasn't available in the ... rdnzl

03:43 pm Revision 891: Updated binaries.

rdnzl

03:42 pm Revision 890: Open Zwave changes, nodeevents are mapped to instance 1, value 1.

Added notification types for buttons (for remote controls)
Added all other notification types to logging.
Added call ... rdnzl

01:29 pm Revision 889: Fixed an RRDTool bug when fetching device id.

rdnzl

10:31 am Feature #129: Aeon Labs Multi

I have updated again and now i`m running... raymonvdm

05/21/2012

09:12 am Revision 888: Updated binaries.

rdnzl

09:12 am Revision 887: Correctly disable/enable OZW polling.

Display device manufacturer and model in ZWave Commander. rdnzl

05/20/2012

08:34 pm Bug #134: Z-Wave interface: Poll Interval=0 doesn't disable polling, but the OZW does extreme agg...

Hi Ron,
I found the solution! :-)
It took me a while to figure out, but it seems that the device also remembers... Alexie

01:06 pm Bug #127: Device status log seems to have gone away

You are right, there is something else at work here.. If I run it in the IDE, not only is the iId correct, it is writ... ReWind

12:33 pm Support #126: HomeMatic rewrite

bugfix 2
FToolsHomeMaticQuickset reads wrong value from database.
spbTemp.Value = (Devices.GetValueForDevice(cmbDev... JK

11:53 am Support #126: HomeMatic rewrite

Bugfix 1
FOR EACH sDummy IN cDestDevice_id
*IF sDummy = sNewDevice_address THEN* cDestDevice_id.Remove(cDestD... JK

05/19/2012

04:25 pm Revision 886: Check if HomeId is known before calling OZW calls, to prevent crash.

Added several node info routines for future use, thanks Alex. rdnzl

03:08 pm Bug #134: Z-Wave interface: Poll Interval=0 doesn't disable polling, but the OZW does extreme agg...

Hi Ron,
Thanks, this is an improvement. Only i think the polling with Domotiga for Z-Wave needs to be revised a li... Alexie

02:59 pm Support #132: Improved Open-ZWave wrapper logging

Ok all code is welcome ;-) rdnzl

02:59 pm Bug #133 (Closed): ZWave interface: If "Poll Interval" is blank/empty, Domotiga crashes

rdnzl

02:57 pm Support #132: Improved Open-ZWave wrapper logging

Hi Ron,
I have tested it and it works fine.
Regards,
Alex
ps. i will submit a new version of the wrapper, w... Alexie

02:55 pm Bug #133: ZWave interface: If "Poll Interval" is blank/empty, Domotiga crashes

Hi Ron,
I tested it and it works fine.
Regards,
Alex Alexie

02:48 pm Bug #127 (In Progress): Device status log seems to have gone away

I cannot reproduce it, all my logging works ok.
Can you open your DomotiGa project with IDE, and set a breakpoint ... rdnzl

02:41 pm Feature #125 (Feedback): HomeMatic changes 29 April

rdnzl

02:40 pm Bug #133 (Feedback): ZWave interface: If "Poll Interval" is blank/empty, Domotiga crashes

Fixed this in r884 and r885. rdnzl

10:15 am Revision 885: Validate input before saving settings.

rdnzl

10:11 am Revision 884: Validate polltime input before saving settings.

rdnzl

10:09 am Bug #134 (Feedback): Z-Wave interface: Poll Interval=0 doesn't disable polling, but the OZW does ...

Changed it in r883. rdnzl

10:09 am Bug #135 (Closed): When adding new Event, Actions aren't visible

rdnzl

10:08 am Support #132 (Feedback): Improved Open-ZWave wrapper logging

rdnzl

10:08 am Support #132: Improved Open-ZWave wrapper logging

Fixed in r883. rdnzl

10:08 am Revision 883: Only log OZW to file, disable console output.

Enable detailed logging again.
If polltime is set to 0 then disabled polling. (needs more work)
Made timestamp log ou... rdnzl

09:36 am Bug #135: When adding new Event, Actions aren't visible

Hi Ron,
I retrieved revision 882 and it works perfectly now. Thanks!
Gr.
Alex Alexie

09:28 am Bug #135 (Feedback): When adding new Event, Actions aren't visible

Fixed in r882, thanks. rdnzl

09:28 am Revision 882: Display new event actions correctly.

rdnzl

05/18/2012

11:31 pm Bug #135 (Closed): When adding new Event, Actions aren't visible

Hi Ron,
I noticed an cosmetical issue when adding new Events, the "Action" names aren't visible until it has been ... Alexie

09:50 pm Support #132: Improved Open-ZWave wrapper logging

Thanks :-) Will make my upgrades easier (and debugging the Open Z-Wave :P ) Alexie

09:48 pm Bug #134: Z-Wave interface: Poll Interval=0 doesn't disable polling, but the OZW does extreme agg...

Hi Ron,
Yes, got the same feeling about the Open Z-Wave project :D
If no poll time isn't specified, it goes to... Alexie

09:37 pm Bug #133 (In Progress): ZWave interface: If "Poll Interval" is blank/empty, Domotiga crashes

rdnzl

09:37 pm Bug #134 (In Progress): Z-Wave interface: Poll Interval=0 doesn't disable polling, but the OZW do...

rdnzl

09:36 pm Bug #130 (Closed): [Events] Conditions with "<" and ">" don't work

rdnzl

09:35 pm Support #132 (In Progress): Improved Open-ZWave wrapper logging

Will fix this too, I played with some of the newer API calls, but it wasn't better than we had before. rdnzl

09:35 pm Bug #133: ZWave interface: If "Poll Interval" is blank/empty, Domotiga crashes

Ok I will fix it, I also want to have things as generic as possible, but thats not always easy, thanks.
rdnzl

09:34 pm Bug #134: Z-Wave interface: Poll Interval=0 doesn't disable polling, but the OZW does extreme agg...

Yeah I know.
Coding the OZW wrapper is a pain in the ass...
Every time something work ok, the guys from OZW change ... rdnzl

09:15 pm Support #132: Improved Open-ZWave wrapper logging

Hi Ron,
Can you change a few things in the DomoZWave.cpp?
When i was using 0.1.204 i got much Z-Wave logging in... Alexie

09:08 pm Bug #134 (Closed): Z-Wave interface: Poll Interval=0 doesn't disable polling, but the OZW does ex...

Hi Ron,
I was testing with the Open Z-Wave and poll interval=0, but if you disable the logging on the Z-Wave inter... Alexie

08:58 pm Bug #133 (Closed): ZWave interface: If "Poll Interval" is blank/empty, Domotiga crashes

Hi Ron,
If go into the Setup -> Interfaces -> Z-Wave and i empty the Open Z-Wave "Poll Interval", Domotiga crashes... Alexie

08:43 pm Bug #130: [Events] Conditions with "<" and ">" don't work

Hi Ron,
I tested it and it working perfect now, thanks!
Gr.
Alex Alexie

08:30 pm Support #132: Improved Open-ZWave wrapper logging

Hi Ron,
To get the same format as the OZW_log.txt, just add the following include to the wrapper:
#include <sys/time... Alexie

04:47 pm Feature #105 (Feedback): OpenTherm gateway support

I have added this code to version 0.1.206, thanks!
@raymonvdm don't under estimate the needed electronics knowledg... rdnzl

04:40 pm Bug #98 (Closed): Fmain.DisplayGraph

I cannot get it to work 100% reliable, it's like kicking away your own legs... rdnzl

04:38 pm Bug #119 (Closed): CRC insertion in Plugwise commands incorrect

rdnzl

04:38 pm Support #122 (Feedback): Patches for HomeMatic

I have added this code to version 0.1.206, thanks! rdnzl

04:37 pm Support #126 (Feedback): HomeMatic rewrite

I have added this code to version 0.1.206, thanks! rdnzl

04:36 pm Bug #130 (Feedback): [Events] Conditions with "<" and ">" don't work

I have added your fixes to version 0.1.206, thanks! rdnzl

04:36 pm Support #132 (Feedback): Improved Open-ZWave wrapper logging

rdnzl

04:36 pm Support #132: Improved Open-ZWave wrapper logging

Thanks, I added your code to version 0.1.206, would be even better if it had the same date format as the OZW_Log form... rdnzl

03:21 pm Feature #105: OpenTherm gateway support

I also would like to know how to build the gateway. I found a list of part but i`m afraid that it wil not be a succ... raymonvdm

03:09 pm New version 0.1.206

New version 0.1.206, you must upgrade your database.
Please make a backup of your database and DomotiGa directory tr... rdnzl

03:07 pm Revision 881: Fixed commit of DomotiGaServer3 files.

rdnzl

02:57 pm Revision 880: New version 0.1.206, you must upgrade your database.

Please make a backup of your database and DomotiGa directory tree first!
Added support for controlling and monitoring... rdnzl

02:11 pm Revision 879: Tag for version 0.1.205 of DomotiGa.

rdnzl

01:49 pm Support #132 (Closed): Improved Open-ZWave wrapper logging

Hi Ron,
I am debugging de HSM100 sensor and i noticed that the Open-ZWave wrapper debugging logging isn't easy rea... Alexie

11:30 am Feature #131 (New): Plugwise kwh usage value

Hi Ron,
In the past we have had contact about Plugwise and you told me that is might be possible that plugwise i... raymonvdm

11:05 am Feature #129: Aeon Labs Multi

I have updated and now i`m running
Domotiga Revision: 878
OpenZwave Revision: 527
Node4 = Meter (NorthQ NQ9021 Pu... raymonvdm

10:50 am Feature #105: OpenTherm gateway support

Question, can you make some screenshots of the devices you have and their values, and maybe your interface, so I can ... rdnzl

10:41 am Bug #130: [Events] Conditions with "<" and ">" don't work

Thanks for the fix, will update soon. rdnzl

10:41 am Feature #105: OpenTherm gateway support

Thanks, nicely written code!
Will include it soon. rdnzl

09:56 am Bug #120: Domotiga does not start when using Velleman K8055 interface

I took another shot at it with the following file... raymonvdm

05/17/2012

10:55 pm Feature #105: OpenTherm gateway support

Today I finally finished the code and tested it roughly
The OpenTherm interface now supports 5 devices:
+Thermo... BreFra

12:57 pm Bug #120: Domotiga does not start when using Velleman K8055 interface

im trying to get it going but without any succes for now
I found out that i need to create a file /etc/udev/rules... raymonvdm

05/16/2012

10:03 pm Bug #121: Notes about Revision 853

I just tested the new versions and the switching using the Duwi Dimmer is working now. When switching on the status i... raymonvdm

08:41 pm Bug #128: Out of memory - Bleutooth.ScanBleutooth.88

Got the same and even Ubuntu 10.10 was frozen that I had to reset it.
Could not make a list of running programs. Dis... Niels

07:38 pm Bug #121: Notes about Revision 853

Can you test again with latest CZwave.class and latest open-zwave r527, they fixed a bug in OZW for dimmers.
I can s... rdnzl

07:30 pm Bug #130: [Events] Conditions with "<" and ">" don't work

Ahummm :-) Forgot to update "sCond", which is also numeric
CASE ">"
IF CFloat(Replace(CString(sValue), ",", ".",... Alexie

07:28 pm Bug #130 (Closed): [Events] Conditions with "<" and ">" don't work

Description:
I created a IF condition for the variable "Minute" and used the greater operand. This results in the fo... Alexie

« Previous

Next »